Topic: meta list wont show (Read 15261 times)

double0killa · « **on:** March 17, 2009, 03:24:42 pm »

i was following the guide from osaeed2k9 on the "how to install source mod" and i got to step 6. this is what he says to do on step 6.

6.) When you have copied the files, it is now time to see if the server can recognize the plug-in you just copied. If your server was executed while copying the files, then turn it off and back on. After its turned on, Type this "meta list" (without the quotations) in the server console and NOT client console. You will see this.....
] meta list

Listing 1 plugin:
[01] SourceMod (1.1.0.2489) by AlliedModders LLC

i did that and this is what my screen said.

63.8 fps 0/ 6 on map ge_complex
Console initialized.
ConVarRef mat_dxlevel doesn't point to an existing ConVar
Game.dll loaded for "GoldenEye: Source"
maxplayers set to 6
maxplayers set to 6
Network: IP 192.168.254.229, mode MP, dedicated Yes, ports 27015 SV / 27005 CL
exec: couldn't exec skill_manifest.cfg
Executing dedicated server config file
Executing dedicated server config file
Executing gamemode [deathmatch.cfg] config file
Loaded gamemode DeathMatch
exec: couldn't exec server.cfg
exec: couldn't exec server.cfg
Adding master server 68.142.72.250:27011
Adding master server 69.28.140.247:27011
Connection to Steam servers successful.
VAC secure mode is activated.
meta list
Unknown command "meta"

is there something i missed.

mookie · « **Reply #1 on:** March 17, 2009, 03:41:08 pm »

Yeah you didn't install Source MetaMod, or you didn't install it right.

double0killa · « **Reply #2 on:** March 17, 2009, 03:54:43 pm »

i wonder what i did wrong. everything seemed to be going well until i hit step 6. what should i do now?

double0killa · « **Reply #3 on:** March 17, 2009, 04:03:30 pm »

hey i got it. i went to this site http://wiki.alliedmods.net/index.php/Installing_SourceMM

and it told me how to make the metamod.

as you can tell, i am a total noob. once i get this server up and running, i will write up a GEICO CAVE MAN NOOBS GUIDE TO INSTALLING SERVERS. For those of us who are crossing over from console gaming to PC gaming.

Thanks for your help man.

double0killa · « **Reply #4 on:** March 17, 2009, 04:30:15 pm »

this server that is listed above. will this be a server that will actually be on the server list when i click on find servers or will it only show under the lan tab. i did what the instructions said but i dont see it under the regular server list. i do see it under the lan server list.

mookie · « **Reply #5 on:** March 17, 2009, 05:14:37 pm »

Check sv_lan in console.

double0killa · « **Reply #6 on:** March 17, 2009, 05:16:56 pm »

in the server console or the client console?

mookie · « **Reply #7 on:** March 17, 2009, 05:38:00 pm »

Server.

double0killa · « **Reply #8 on:** March 17, 2009, 05:56:52 pm »

ok in the server i type check sv_lan and it said check is a unknown command so i just type sv_lan and this is what is said.

62.7 fps 1/ 6 on map ge_complex
Console initialized.
ConVarRef mat_dxlevel doesn't point to an existing ConVar
Game.dll loaded for "GoldenEye: Source"
maxplayers set to 6
maxplayers set to 6
Network: IP 5.186.216.82, mode MP, dedicated Yes, ports 27015 SV / 27005 CL
L 03/17/2009 - 13:48:10: -------- Mapchange to ge_complex --------
exec: couldn't exec skill_manifest.cfg
Executing dedicated server config file
Executing dedicated server config file
Executing gamemode [deathmatch.cfg] config file
Loaded gamemode DeathMatch
exec: couldn't exec server.cfg
exec: couldn't exec server.cfg
Adding master server 68.142.72.250:27011
Adding master server 72.165.61.189:27011
Connection to Steam servers successful.
VAC secure mode is activated.
Client "Double0Killa" connected (192.168.254.229:27006).
check sv_lan
Unknown command "check"
sv_lan
"sv_lan" = "0"
- Server is a lan server ( no heartbeat, no authentication, no non-class C addr
esses )

what does this mean. does this mean that my server wont show up on the dedicated servers. It still doesnt show on that tab. but however, it shows on the lan tab. how can i get my server to show up where the rest of the servers are at.

mookie · « **Reply #9 on:** March 17, 2009, 06:04:58 pm »

sv_lan 0 (false) means the server isn't a LAN server. Check your firewall, NAT, etc. You'll need to let 27015 through. Post your hostname and leave the server up for a bit, it might just not show up for you.

double0killa · « **Reply #10 on:** March 17, 2009, 06:20:59 pm »

ok i turned my firewall wall off. i have no router. im hardwired. also how do you put in a host name

mookie · « **Reply #11 on:** March 17, 2009, 06:30:57 pm »

Check hostname in console.

double0killa · « **Reply #12 on:** March 17, 2009, 06:35:45 pm »

my hostname says "goldeneye source" < def. """" >

double0killa · « **Reply #13 on:** March 17, 2009, 06:37:24 pm »

also in the above post you said to let port 27015 through. according to the above green text, it looks like it was already open.

mookie · « **Reply #14 on:** March 17, 2009, 06:40:41 pm »

I don't see it. Is this a 3.1 server?

All what's above shows is that SRCDS was able to bind 27015.

Is 5.186.216.82 your real IP address? If so, the server is not running, or I can't get through on 27015 with HLSW.

double0killa · « **Reply #15 on:** March 17, 2009, 06:46:19 pm »

yea its a 3.1 server. i just changed my host name to double. i followed the instructions on the wiki on how to install a source mod server. i didnt have the earlier version of GES. the 3.1 is the only one i ever downloaded. i must have missed something in order for you not to at least see it.

double0killa · « **Reply #16 on:** March 17, 2009, 06:50:10 pm »

i dont think 5.186.216.82 is my ip address. when i go to whatsmyip this is what it tells me 70.161.238.194.

mookie · « **Reply #17 on:** March 17, 2009, 06:52:44 pm »

Go here and check 27015.

http://www.canyouseeme.org/

Also, in the server console, do status and post back what it says.

double0killa · « **Reply #18 on:** March 17, 2009, 06:59:21 pm »

ok i went to canyuseme.org and put in the 27015 and this is what it said.

Error: I could not see your service on 70.161.238.194 on port (27015)
Reason: Connection refused

i have my firewall off so i dont know how this is still being blocked this is what my screen says after status in the server console.

64.0 fps 0/ 6 on map ge_complex
Console initialized.
ConVarRef mat_dxlevel doesn't point to an existing ConVar
Game.dll loaded for "GoldenEye: Source"
maxplayers set to 6
maxplayers set to 6
Network: IP 5.186.216.82, mode MP, dedicated Yes, ports 27015 SV / 27005 CL
L 03/17/2009 - 14:57:22: -------- Mapchange to ge_complex --------
exec: couldn't exec skill_manifest.cfg
Executing dedicated server config file
Executing dedicated server config file
Executing gamemode [deathmatch.cfg] config file
Loaded gamemode DeathMatch
exec: couldn't exec server.cfg
exec: couldn't exec server.cfg
Adding master server 69.28.140.246:27011
Adding master server 72.165.61.189:27011
Connection to Steam servers successful.
VAC secure mode is activated.
status
hostname: GoldenEye: Source
version : 1.0.1.0/14 3740 secure
udp/ip : 5.186.216.82:27015
map : ge_complex at: 0 x, 0 y, 0 z
players : 0 (6 max)

# userid name uniqueid connected ping loss state adr

mookie · « **Reply #19 on:** March 17, 2009, 07:03:21 pm »

OK so:

(1) Port 27015 is blocked. You have to find one that's not. It could be your ISP, or your own equipment. If your firewall is off, and you're plugged into your modem, it's probably your ISP.

(2) SRCDS has the wrong IP address (5.186.216.82). That's pretty fishy. Try adding "+ip 70.161.238.194" to your arguments.

double0killa · « **Reply #20 on:** March 17, 2009, 07:14:38 pm »

forgive me for asking you this mookie, but how do i add that to arguments. i have a brain meltdown going on rite now. i been trying to figure this out all day. whats a argument

mookie · « **Reply #21 on:** March 17, 2009, 07:21:54 pm »

Probably you're launching the server from a batch file, all the arguments come after srcds.exe and start with - or +. You'll already have at least -console and -game gesource.

double0killa · « **Reply #22 on:** March 17, 2009, 07:29:11 pm »

yea im launching it with a batch file. that is what the wiki instructions said to do. i guess i need to do it another way

mookie · « **Reply #23 on:** March 17, 2009, 07:32:33 pm »

Batch is the way to go, unless you have a daemon-managing program for loading servers. Just edit the batch file.

double0killa · « **Reply #24 on:** March 17, 2009, 07:36:36 pm »

cool i will do that and see what happens. thanks for being patient with me.

major · « **Reply #25 on:** March 17, 2009, 10:34:06 pm »

For the Meta command, un-zip and move the .vdf file into the gesource/addons folder. This tells meta what game your running, and where.

http://wcservers.net/download/metamod.zip

double0killa · « **Reply #26 on:** March 18, 2009, 12:08:15 pm »

Hey thanks major, i finally got a server up and running last night. Thanks for all the input. apparently my issue was i had Hamanchi installed. i had to disable it on my network settings. after that, i loaded up a server and was able to see it on the master server list and was able to join it.

GoldenEye: Source Forums

News:

Author Topic: meta list wont show (Read 15261 times)